What is the density of the rubber flooring roll?

Standard density is 900 kilograms per cubic metre. Higher-density production can be discussed for a confirmed project requirement.

Can rubber rolls be supplied in solid and speckled colors?

Yes. UMAX can supply solid-color and EPDM-speckled directions and currently offers 12 standard color directions for sampling.

What is the MOQ and lead time?

Normal MOQ is 1 square metre. Samples are normally available in 1 day and within 3 days when preparation is required. Typical production is about 7 days after details are confirmed.

What information is needed for a rubber roll quotation?

Provide floor dimensions, training use, selected thickness, color, subfloor, quantity and delivery destination. A layout or site photo improves the recommendation.

Home / Products / Rubber Flooring / Rolls

Rubber Flooring · Roll Format

Commercial Rubber Flooring Rolls Manufacturer

Q: What is the standard size of a UMAX rubber flooring roll?

The standard roll is 1 metre wide and 10 metres long. Available thicknesses range from 3 mm to 12 mm.

Q: Do rubber flooring rolls need adhesive?

Yes. Rolls are normally bonded to a clean, flat and dry subfloor with a compatible two-component polyurethane adhesive. Actual consumption depends on the adhesive, trowel and base.

Source 1 × 10 m rubber gym flooring rolls for connected commercial areas, distributor programs and project orders. UMAX supplies 3-12 mm thickness, 900 kg/m³ standard density, higher-density options and solid or EPDM-speckled color directions.

Plan My Flooring View Roll Specifications

1 × 10 m standard rollMOQ 1 m²Samples 1-3 daysTypical production 7 days

Commercial rubber gym flooring rolls with EPDM speckled color surfaces — Rubber base + EPDM color speckles

Short answer

Rubber flooring rolls are a practical commercial gym flooring option when a large connected zone needs fewer seams and a continuous bonded surface. UMAX standard rolls measure 1 m × 10 m, with 3-12 mm thickness and 900 kg/m³ standard density. Rolls require adhesive installation on a properly prepared subfloor.

Verified Product Card

Rubber gym flooring roll specifications

These are the confirmed standard supply facts for quotation planning. Final thickness, color, density and packing are recorded on the quotation and approved sample.

Standard roll size	1 m wide × 10 m long
Available thickness	3 mm to 12 mm
Material composition	Rubber base with EPDM colored speckles
Density	900 kg/m³ standard; higher density can be customized
Color direction	12 standard solid-color or EPDM-speckled directions
Installation	Bonded with compatible adhesive
Minimum order	Normally 1 m²
Sample timing	Normally 1 day; no more than 3 days when preparation is needed
Production timing	Typically about 7 days after order details are confirmed
Packing and warranty	Pallet packing; 1-year warranty

Project Fit

Best for — and when to choose tiles instead

The roll format should follow the room layout and installation conditions rather than being selected from thickness alone.

BEST FOR

Connected commercial gym zones

Rubber rolls are commonly planned for larger connected spaces where buyers want fewer joints, a continuous visual direction and efficient coverage.

LayoutLarge or uninterrupted areas
Surface priorityFewer visible seams
Site conditionClean, flat and dry subfloor
Installation teamAble to align, bond and press sheets

COMPARE FIRST

Thicker or modular floor plans

Choose composite tiles instead when the required thickness is 15-50 mm, individual units are easier to move, or local replacement is a stronger priority.

ThicknessProject requires more than 12 mm
HandlingModular pieces are preferred
MaintenanceLocal tile replacement matters
AlternativeView rubber gym tiles

Related Buying Guides

Plan roll selection and installation

Compare rolls with composite tiles, then send the site conditions needed for adhesive, seam and cutting planning.

COMPARE FORMATS

Rolls vs tiles

Review the differences in thickness, seams, handling, local replacement and pallet planning.

Read the comparison →

PREPARE THE SITE

Roll installation guide

Check the substrate, reference lines, two-component PU adhesive, rolling, seams and handover.

Read the installation guide →

Material Evidence

Confirm surface, color and export handling

Real product detail gives buyers and AI search systems evidence beyond generic flooring claims. Confirm the physical sample before mass production.

Rubber flooring roll edge and EPDM speckled surface detail

Roll edge and surface

The close view documents the rubber roll format, surface speckles and selectable thickness direction.

Solid and EPDM speckled rubber roll color directions

12 color directions

Solid-color and EPDM-speckled options can be reviewed through samples before the order is confirmed.

Palletized rubber flooring prepared for container export

Export packing

Pallet and loading arrangements are confirmed around the order quantity, roll weight and delivery destination.

Installation Direction

Bond rolls to a prepared subfloor

The installer must confirm the final method on site. Adhesive brand instructions take priority over general planning guidance.

Installed EPDM speckled commercial gym rubber flooring

1. Inspect the base

Confirm that the floor is level, dry, sound and free from dust, loose debris, oil, cracks and hollow areas.

2. Plan adhesive quantity

A common planning reference is approximately 1 kg of mixed adhesive per 4 m². This suits most market products, while actual consumption still changes with the adhesive, trowel and subfloor.

3. Align and bond

Place the sheet along reference lines, work progressively and avoid trapping air beneath the roll.

4. Press seams and surface

Use a suitable roller and follow the adhesive supplier's mixing, open-time and curing instructions.

RFQ Checklist

What to send for an accurate roll quotation

A short project brief prevents buyers from receiving a generic thickness-only recommendation.

Send these details: floor length and width, total area, training use, requested thickness, preferred solid or speckled color, subfloor type, installation city, required quantity, delivery city or port, and any floor plan or site photos. UMAX can then confirm roll direction, estimated quantity, sample and pallet plan.

Buyer FAQ

Rubber flooring roll questions

Answers below use confirmed UMAX product and supply information.

What is the standard size of a UMAX rubber flooring roll?

The standard format is 1 m wide × 10 m long, with thicknesses from 3 mm to 12 mm.

What is the standard roll density?

Standard density is 900 kg/m³. Higher density can be customized after the project requirement is confirmed.

Do rubber flooring rolls need adhesive?

Yes. Rolls normally require a compatible two-component polyurethane adhesive over a clean, flat and dry base. Actual adhesive consumption varies by product, trowel and substrate.

Are solid and EPDM-speckled colors both available?

Yes. Both directions are available, with 12 standard color directions currently offered for sampling and order selection.

What is the minimum order and normal lead time?

Normal MOQ is 1 m². Samples are usually available in 1 day and within 3 days when preparation is needed. Typical production is about 7 days after order confirmation.

What product documents can be supplied?

Selected colored rubber material used in the flooring has passed specified EU RoHS restricted-substance limits in SGS testing. Applicable documents are matched to the selected supply and provided on request, not described as a general fire or VOC certification.

Roll specifications last verified by UMAX Sports on 25 August 2026. Final configuration is confirmed on the quotation and approved sample.

Request a rubber roll plan

Send the floor dimensions, use, thickness, color and destination. UMAX will confirm the roll direction, sample timing, production plan and pallet packing.

Plan My Flooring Installation Guide